JCT Machinery, produce chemical mixer since 2006.
Language
JCT Machinery, produce chemical mixer since 2006.
◪Preparation of raw materials according to the construction silicone sealant formula, add to the base disperser / kneader, powder materials can be put into the disperser for 2~3 times. Through a period of time mixing, the temperature will be raised because of the friction between the materials, to achieve full mixing effect. Start the vacuum system and draw the water from the materials.
◪The base materials will come to the base materials storage tank by the high viscosity pump, slowly adding these materials to the three roller grinding machine, to achieve the finess requirements.
◪After grinding of the base materials, put the materials into the mixing cylinder. Then. adding other ingredients and paste.
◪The mixing cylinder will be pushed into a multifunctional dispersing machine, starting stirring and high-speed dispersing. At the same time, starting the vacuum system, drawing out the moisture and air from the materials. Start the cooling system to control the temperature of the materials.
◪After the production is finished, the mixing cylinder is pushed into the hydraulic discharging machine, and materials are transported to a material cylinder of the packaging machine.
◪Putting the bucket into the packaging machine and then filling.
◪Packaging the finished products into the warehouse.
We are professional mixing manufacturer, providing sigma mixer, reactor, dual shaft mixer, etc .
