High Speed Disperser Working Principle
1. High Effeciency
High speed disperser can evenly disperse high viscosity paints, pigments and other materials, improving the quality and efficiency of the paint.
2. High Precision
By controlling the speed of the dispersion shaft and adding suitable additives, a better dispersion effect can be achieved, while avoiding the problem of over-dispersion.
3. Energy Saving
Due to its high speed stirring and dispersing effect, high speed disperser has low energy consumption.
4. Easy to operate and maintain
High speed disperser has a simple structure and is easy to operate and maintain. Operators only need to follow the correct safety operating produres.
1.
The V-belts should be of equal length and placed in the transmission box. Tighten the slide bolts appropriately.
2.If high speed disperser is not used for a long time, the power supply must be cut off, all cleaned, all lubricating parts oiled, and the main shaft and cylinder oiled to prevent rust.
3.
The oil tank uses anti-wear hydraulic oil, which should be replaced every six months, and the oil tank should be cleaned. The filter should be cleaned once a month and cleaned within two or three days after the oil change.
4.
The gears, bearings, balls, shafts, sleeves and cyliinders of the rotating parts of high speed disperser should be oiled once a week. If overheating or abnormal noise is found during use, it should be checked in time.
5.
If the thermal relay is activated due to overload and stops, the "reset" button of the thermal relay must be pressed before the operation can continue.
6.
The AC contactor should be checked every six months, and the high speed disperser should be overhauled once a year.
7.
Regulary check the wearing parts of high speed disperser, such as bearings, oil seals, etc., and replace them immediately if they are worn.